Why SUPERPRO? |
|
Technical advantages |
|
Xeltek has been making SUPERPRO series device programmers since 1990 and is well experienced in this business. Up to 10,000 chips in various packages from over 80 manufacturers are supported at highest reliability and speed. SUPERPRO is built with the most advanced features you can imagine. |
|
Total solution |
Various models are provided to meet your needs in low cost and high end, engineering and production, gang and cluster, PC-hosted and stand-alone use. |
|
Advantage on support by IC manufacturers |
Located in Silicon Valley, Xeltek USA keeps good relationships with many major IC companies that are important for us to support new chips continuously. Algorithm update is available free and rapidly by internet. |
Advantage on pricing |
Located in Nanjing, P.R.C., Xeltek China provides lowest R&D and manufacturing cost. This is why we can offer you better or equal performance at much lower prices than all of our competitors. |
|
Worldwide distribution and support network |
Distribution and support are available in over 20 countries, China, USA, Canada, Mexico, Brazil, Japan, Korea, Czech, Bulgaria, UK, Germany, France, Italy, India, Thailand and Singapore etc. |
|
Advanced features |
SUPERPRO is designed with the state-of-art hardware architecture with on-board high speed CPU, RTOS, FPGA, CPLD and high quality universal pin-drivers. These enable it an advanced programmer. |
- The 48 pins (expandable to 100 pins) powerful universal pin-drivers can lead programmable precision voltage signals, GND, CLK, to any pin. A FPGA provides full I/O signals (level programmable from 1.5v to 5v) to up to 100 pins. These make the programmer truly universal: Both current and future, 5v and low voltage devices are supported. Different devices in same package share one adapter. For example, the only QFP44 adapter SA244 supports all MCUs, PLDs and memory. All DIL devices are supported directly with the ZIF48 socket as a standard accessory. The benefits brought to user by this are the rapid availability of device support by simply d/l new algorithms and saving in adapter purchasing by the limited types.
- Semiconductor manufacturer-approved algorithms, precision and clean signals promise high programming yield. Algorithm waveform is generated by hardware offering 0.05v programming voltage resolution and I Us timing resolution. Special design was made to eliminate overshoot and ground bounce.
- Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.
- Insertion and continuity check are performed before programming to protect devices from damaged due to operation error.
- Over current and over voltage protection is acted to each pin to protect programmer hardware from destroy due to bad chip short circuit and ESD.
- Stand-alone mode makes production more efficient.
- User-friendly s/w features. Auto-count, batch command, Insertion-and-start. Windows compatible s/w.
|
|
Who are our customers? |
SUPERPRO has over 50,000 users worldwide. A partial list of well-known users below:
AT&T, Motorola, Lucent, Cisco, Nokia, Nortel, Bell, Huawei, Intel, Atmel, Fujitsu, TI, Seiko, Philips, Cirrus Logic, IBM, Microsoft, HP, DELL, Segate, EPSON, Compaq, NEC, SONY, Panasonic, Haier, Changhong, Shinco, Hisense, Amoisonic, Malata, Panda, Fuji, General Motors, Boeing, Lockheed Martin, Minolta, Honeywell, Boston University, CIT, CSUF, California Institute of Technology, Stanford University, University of California, Purdue University, Qinghua University, Channel 9 Australia, Federal Highway Administration, Lawrence Berkely National Laboratory, Mastercard International Japan, US Airforce, US Airway, US Army, China Aerospace Administration, US Navy, NASA |
Which model to buy ? (Feature Comparison)
Horizontal integrated contrast of all Series of programmers
SUPERPRO |
Speed
(P+V) |
Device quantity |
Drivers scale |
Offline |
Production mode |
Communication Interface |
Application |
5000
|
* * * * *
108 second (1GbNAND)
11.3 second
(64Mb NOR)
|
* * * * *
Not less than 3000U |
144 universal pin-drivers |
More than 100 project files can be stored in a CF card |
Multi-Machine parallel offline operation |
USB2.0 |
high-speed, and support a wide range of device types, suitable for high-end R & D and mass production, especially for large-capacity FLASH memory. Free of computer |
5004GP
|
* * * * *
Not less than 3000U |
144 universal pin-drivers
x 4 Module |
- |
The CPU of each module runs independently; fully asynchronous operation |
USB2.0 |
high-speed, and support a wide range of device types, suitable for mass production, especially for large-capacity FLASH memory. |
3000U
|
* * * * |
* * * * *
42000+ |
48 universal pin-drivers |
Can store at most 16 project files |
Multi-Machine parallel offline operation |
USB1.1 |
High-speed, and support a wide range of device types, suitable for high-end R & D and mass production, free of computer. |
580U
|
* * * * |
* * * *
31000+ |
48 universal pin-drivers |
- |
|
USB1.1 |
High-speed, and support a wide range of device types, suitable for R & D and small scale production. |
280U |
* * * * |
* * *
22000+ |
48 universal pin-drivers |
- |
|
USB1.1 |
High-speed, and support a wide range of device types, suitable for R & D and small scale production. |
9000U |
* * * * |
* * * *
36000+ |
48universal pin-drivers
x 4 Module |
Each CF card can store one project file |
The CPU of each module runs independently; fully asynchronous operation |
USB1.1 |
High-speed, and support a wide range of device types, suitable for mass production of devices with 32M capacity or less. |
Note: |
higher than other competitors |
Date:
2008.3 |
The more full driving feet it has, the more universal the adapter is |
|
Asynchronous mode can enhance productivity. Every type has auto-launch function. |
|
|
|
USB Series
|
|
|
|
Algorithm Enginee |
Embedded CPU |
Embedded CPU |
Embedded CPU |
I/O Driver |
256 Levels |
256 Levels |
256 Levels |
Pin Drivers |
48 Pins (Standard)
100 Pins (Option)
(PEP3000 Module) |
48 Pins Full Driver |
48 Pins Popular Driver |
Adapter |
Universal |
Universal |
Universal |
Stand-Alone Mode |
Yes |
No |
No |
USB Port |
Yes |
Yes |
Yes |
Low Voltage Device |
1.5V |
1.5V |
1.5V |
Support Devices |
38000+
E/EPROM
BGA
PLD
FLASH
MCU |
29000+
E/EPROM
BGA
PLD
FLASH
MCU |
20000+
E/EPROM
PLD
FLASH
MCU |
Programming Speed (Intel 28F320W18) |
13.5s |
13.5s |
- |
Pin Continuity Test |
Yes |
Yes |
Yes |
OS |
Windows 9x/ME/2000/NT/XP |
TTL/SRAM Test |
Yes |
Yes |
Yes |
Other Features |
Auto_Sense
Run Batch Command
Auto Serial Number |
Auto_Sense
Run Batch Command
Auto Serial Number |
Auto_Sense
Run Batch Command
Auto Serial Number |
Stand-Alone Series
|
SUPERPRO/8000 (Legacy) |
SUPERPRO/9000U |
Algorithm Enginee |
Embedded CPU |
Embedded CPU |
I/O Driver |
256 Levels |
256 Levels |
Pin Drivers |
48 Pins Full Driver |
48 Pins Full Driver |
Adapter |
Universal |
Universal |
Stand-Alone Mode |
Yes |
Yes |
Parallel Port |
Yes |
Yes |
Support Devices |
5100+
E/EPROM, PLD, FLASH MCU |
33000+
E/EPROM, PLD, FLASH, MCU |
Low Voltage Device |
1.8V |
1.5V |
Programming Speed
(Intel 28F800B3) |
12s/8Pcs |
12s/4Pcs |
Pin Continuity Test |
Yes |
Yes |
OS |
Windows 9x/ME/2000/NT/XP |
TTL/SRAM Test |
No |
No |
Other Features |
Auto_Sense and Run Batch
Command. Auto Serial Number |
Auto_Sense and Run Batch
Command. Auto Serial Number |
|
|
LPT Series
|
SUPERPRO/L+ |
SUPERPRO/Z |
Algorithm Enginee |
PC |
PC |
I/O Driver |
- |
- |
Pin Drivers |
48 Pins Popular Drive |
40 Pins Popular Drive |
Adapter |
Special |
Special |
Parallel Port |
LPT |
LPT |
Support Devices |
3900+
E/EPROM,PLD,FLASH,MCU |
2900+
E/EPROM,PLD,FLASH,MCU |
Low Voltage Device |
3V |
3V |
Pin Continuity Test |
- |
- |
Windows98/95/ME |
Yes |
Yes |
Windows/2000/NT/XP |
Beta |
Beta |
TTL/SRAM Test |
Yes |
Yes |
Other Features |
Run Batch
Command
Auto Serial Number
|
Run Batch
Command
Auto Serial Number |
|